[. . . ] Welcome to the world of pure music We are delighted that you have chosen a Canton loudspeaker. Our products combine high quality components with many years of development experience and meticulous production methods. [. . . ] Use the enclosed installation template to ascertain the exact size of the wall cutout. ENG Now hollow out an appropriate installation opening in the wall/ ceiling. When laying loudspeaker cable from amplifier to installation point, be sure that the cable ends about 30 cm (12") beyond the wall cutout. ENG if the red mounting tabs are in a horizontal position and the screws firmly screwed in theyare ready for installation. Important: To prevent damage to the mounting tab, do not twist screws too tightly. ENG in order to fine-tune the loudspeaker system to produce an optimal sound for the location it is possible to position the tweeter in such a way as to adjust the dispersion angle. ENG On the front of the loudspeaker system there is a switch marked -/+ for adjusting the tweeter level. ENG The magnetic catch allows you to remove and replace the cover grill of the loudspeaker system at any time. Installation is now complete and the loudspeaker system is ready to use. The grill cover of the inWall/inCeiling systems can simply be coated with regular paint. [. . . ] This applies to all loudspeakers purchased from an authorised Canton dealer. In the event of damage please contact your dealer or the Canton Service department direct. [. . . ]